Back

2024 SCAG Power Equipment SFC-21 SFC-21-7CV


MoreLess
Limited Time Offer!

Selling Price -$1,828.00

No Images Available

Selling Price -

$1,828.00

HD Certified Pre-Owned
No Description is Available for this Unit
  • 2024
  • SCAG Power Equipment
  • SFC-21
  • SFC-21-7CV
  • Walking
  • Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
  • Kohler® Command PRO®
  • Easy-Pull™ recoil start
  • Horsepower: 7HP @ 3300 RPM
  • 224 cc
  • One with cast-iron cylinder bore
  • air-cooled
  • gas
  • Quad-Clean™ four-stage
  • cyclonic air filter
  • Front discharge muffler with guard
  • Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm
  • Transmission
  • GT MG 512 transmission, 3-speed
  • Travel Control: Variable drive control bar and 3-speed selector lever on handlebar
  • 0.50" diameter
  • Type: Heavy-duty Blade Brake Clutch (BBC)
  • 10.5 x 3
  • 9 x 2.25
  • Forward: Up to 4.25 mph
  • Oil: Steel oil pump; Full pressure lubrication with spin-on oil filter
  • 14 gauge
  • Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable | Cutter Blade: 0.1345 in. thick, milled edge, wear resistant
  • Operating Position: 63.0 - 68.5" | Storage Position: 41"
  • 23.25"
  • Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments
  • 21 inches (53.34 cm)
  • 21.2"
  • 1 gallon (3.785 liters) plastic tank
  • without bagger: 138 lb | with bagger: 143 lb
  • Safety Group: Handle actuated operator presence system
  • 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped.
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $1,828.00
  • ROYSE CITY
  • New
  • SCSFC217CV2976-004
  • 2024
  • SCAG Power Equipment
  • SFC-21 SFC-21-7CV
  • W2403193
  • Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
  • GT MG 512 transmission, 3-speed
  • gas
  • Available
  • 23.25"
  • Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments

Recommendations

Advertised pricing excludes applicable taxes title and licensing and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.